Month: August 2003

GMB 100

GMB 100

GMB100 is a master generator with 4 fixed Black Burst outputs and 1 programmable pattern test output. The test output is available in Pal and Y/C formats. The unit may be useful as master generator in studio, OB-Van and for the editing station background. The test outputs may be used for monitors and video projectors calibration. GMB100 provides also a balanced audio output at 1 KHz, 0 dBm on 600 ohm

  • 4 fixed Black Burst outputs
  • Test output in Pal and Y/C
  • Choice among 6 test signals
  • H/subcarrier genlocked
  • 1 KHz balanced audio output
VIDEO

Output type standard, with black level at 0 VDC
Black Burst out return loss 40 dB at 5 MHz
Black Burst out isolation 35 dB at 5 MHz
Phase error max 1°
Stability better than 30 ppm
Test output type standard Pal + Y/C
Pattern available 75% BARS, Y BARS, GRID, DOTS, RAMP, Y RAMP
AUDIO

Output type Electronically balanced on XLR
Level 0 dBm ± 0.5 dB on 600 ohm
Output impedance 600 ohm
Frequency 1 KHz ± 30 Hz

GENERAL

Main input 230 Vac 50 Hz
Power consumption 6 VA
Size (WxDxH) 483 x 220 x 44 mm
Weight 1.8 Kg
Operating temperature range 0 – 45 °C
Safety according to EN60065
EMC according to EN55103-1 and EN55103-2

up-5006357

MD 164

MD 164

MD 164 is a 16×4 matrix suited for serial digital video signals. It’s compatible with the rates from 143Mb/s to 360Mb/s. MD 164 is controlled by dedicated remote panels (COIN 164) in single bus or global mode.


  • Cable automatic compensation up to 250 mt RG59 B/U
  • Two outputs per bus
  • Reclocked outputs
  • Ref. loop input
  • COIN indicates input rate
  • RS 232 for computer control
  • Memory retention
INPUTS

Number 16
Signal type serial from 143 Mb/s to 360 Mb/s
800 mVpp, 75 ohm, AC coupled
Compensation automatic up to 250 mt RG59 B/U cable
Return loss >18 dB at 270 MHz
Analog ref. for switching high Z loop, for active video or black burst
Switching external analog ref. on line 6 default or selectable from line 2 to 10
OUTPUTS

Number of  bus 4
Outputs per bus 2
Signal type As input, reclocked, 75 ohm
Retur loss >18 dB at 270 MHz
External control COIN 164 (dedicated panel) with conn. sub-D 9 p. f.
Computer control RS 232 with conn. sub-D 9 p. m. 

GENERAL

Main input 230 Vac 50 Hz
Power consumption 15 VA
Size (WxDxH) 483 x 310 x 44 mm
Weight 3.5 Kg
Operating temperature range 0 – 45 °C
Safety according to EN60065
EMC according to EN55103-1 and EN55103-2

up-9024511

ELV

ELV

The ELV video patch panels series was developed to meet the demands of professional and broadcast operator All models are equipped with tag-carrier and can be furnished with a large series of accessories.

elv-mini-4420404

Model ELV 16BP brings a row of 16 BNC/JACK connectors. The mobile connections are accomplished on the front panel and are simplified by the use of quick connection connector. (75Ω jacks).
Model ELV 32BP consist in a 2U panel on which are mounted two rows of 16 BNC/JACK connectors. The mobile connections are accomplished on the front panel and are simplified by the use of quick connection connector

up-5469046

MDS 100

MDS 100

MDS100 is a unit that contains two separated format converter: it may transform the standard TV signal into a graphic SVGA signal, while a SVGA signal, up to 1024×768, may be converted in a standard TV signal. The choice among 3 video inputs and 2 PC inputs make MDS100 very useful in the multimedia presentation systems

  • 5 inputs with combined audio
  • Two simultaneous conversions: PC/TV and TV/PC
  • Wide range of corrections and settings
  • Both the outputs with audio mute function
  • Both the outputs with OSD
  • Memory retention of settings
  • Recallable presettings
  • Fully PC controlled
  • Infrared control

PC software & protocol

VIDEO

Inputs 2 CVBS with RCA socket 1 Y/C with mini-Din

2 PC (bypass) with HDD 15 p. f.

Inputs PC format compatibility up to 1024×768, 70 Hz not interlaced

Output high resolution

Format SVGA 800×600 50 Hz with HDD 15 p. f.
Sync level TTL, Horiz. 31 kHz, Vert. 50 Hz
Sync polarity selectable by IR control or RS 232

Output standard TV

Format PAL + Y/C with BNC and mini-Din 4 p.
AUDIO

Inputs 5 stereo with RCA socket
Input coupling AC, unbalanced
Input impedance 47 Kohm
Input level +11 dB max
Gain -0.5 dB
Frequency response -1 dB from 40 Hz to 20 KHz
Crosstalk 60 dB at 5 KHz
Distortion
INBOX 4

INBOX 4

INBOX/4 is a high resolution computer graphic signals distributor with one input and four outputs

  • Four buffered outputs
  • Compensation up to 50 mt SVGA cable
  • Linkable in cascade
  • VGA, SVGA, XGA, XGA2 and MAC compatible
  • Suitable for 16.8 M of colors
VIDEO

RGB signal analog
Input impedance 75 ohm
Synchronism Hs and Vs TTL pos/neg
Input connector HDD 15 p. m.
Output connectors HDD 15 p. f.
Band width 250 MHz
Driving capability >50 m SVGA cable
(BOOST 1 – 4 ON)
GENERAL

Main input (with AC adapter ADM 001) 230 Vac 50 Hz
Power consumption 5 VA
Size (WxDxH) 220 x 100 x 55 mm
Weight 0.6 Kg
Operating temperature range 0 – 45 °C
Safety according to EN60065
EMC according to EN55103-1 and EN55103-2

up-6018332

INBOX 8

INBOX 8

INBOX/8 is a computer and workstation graphic signals distributor with one input and eight outputs. Its excellent features with a careful design make this unit very useful for heavy and continuous use. Show rooms, airports, museum, stores and hotels are the main fields of application.

  • Eight buffered outputs
  • Compensation up to 50 mt of SVGA cable
  • All format compatible
  • Linkable in cascade
  • 300 MHz bandwidth
  • Self powered
VIDEO

RGB signals analog, positive
Input coupling DC
Input impedance 75 ohm
Input level max 1 Vpp on 75 ohm
DC on outputs max ± 20 mV
Band width 300 MHz (booster OFF)
Synchronism Hs and Vs TTL level
Driving capability >50 mt SVGA cable 
Connectors HDD 15 p. f.
GENERAL

Main input 230 Vac 50 Hz
Power consumption 6 VA
Size (WxDxH) 483 x 210 x 44 mm
Weight 2 Kg
Operating temperature range 0 – 45 °C
Safety according to EN60065
EMC according to EN55103-1 and EN55103-2

up-5464276

INBOX 2

INBOX 2

INBOX/2 is a high quality graphic splitter. It receives the graphic signals from a computer and provides two outputs towards the local monitor and remote monitor or LCD projector

inbox2-mini-9030998
  • Loop-through for local monitor
  • Input impedance automatically set
  • Pre-compensated output for remote monitor or LCD projector
  • VGA, SVGA, XGA, XGA2 and MAC compatible
  • Suitable for 16.8 M of colors
VIDEO

RGB signal analog
Input impedance automatic, high Z or 75 ohm
Synchronism Hs and Vs TTL pos/neg
Input connector HDD 15 p. m.
Output connector HDD 15 p. f. for local monitor
HDD 15 p. f. for remote monitor
Band width 230 MHz
Driving capability 30 m SVGA cable
GENERAL

Main input (with AC adapter ADM 001) 230 Vac 50 Hz
Power consumption 5 VA
Size (WxDxH) 220 x 100 x 55 mm
Weight 0.6 Kg
Operating temperature range 0 – 45 °C
Safety according to EN60065
EMC according to EN55103-1 and EN55103-2

up-5796754

MDL 100

MDL 100

The MDL100 converts the standard TV signal into a high resolution RGBHsVs graphic signal. It can be used to enhance image quality in the case of video projection or monitor display. The possibility of selecting among 4 video inputs with related associated audio makes the MDL100 very useful in the multi-media presentations.

  • 4 inputs with associated audio
  • IR control optional
  • Video/audio mute function
  • On screen menu (OSD)
  • Maintenance of settings
  • Recallable presettings
  • Wide range of corrections and adjustments
  • Fully controlled by PC

PC software & protocol

VIDEO

Inputs 2 PAL with BNC 1 Y/C with mini-DIN

1 PC (bypass) with HDD 15 p. m.

Output high resolution RGBHsVs with HDD 15 p. f.
Sync level TTL, Horiz. 31 kHz, Vert. 50 Hz
Sync polarity selectable
AUDIO

Inputs 4 stereo jack sockets 3.5 mm
Input coupling AC, unbalanced
Input impedance 47 Kohm
Input level +11 dB max
Gain -0.5 dB
Frequency response -1 dB from 40 Hz to 20 KHz
Crosstalk 60 dB at 5 KHz
Distortion
ELD

ELD

ELD 12 is a patch panel for a multiple cable suited for the interconnection among machines which operate with RS422.

ELD 12 consists of a 1 RU panel which presents:

  • 12 modular 8p.jack connectors on front panel to make quick connections
  • 12 connectors DB 9p.f. on rear panel to receive the RS422 cables

Through the 6 cables included with with the unit, one or two control edit can drive several different units

up-8746593

DUBOX 101

DUBOX 101

DUBOX 101 is an integrated distribution amplifier for video and stereo audio signal with 1 input and 10 outputs

  • Video differential looping input
  • Audio differential inputs
  • Video and audio level adjustment
  • Audio full power bandwidth at 150 KHz
  • Suited for integrated studio distribution
VIDEO

Input coupling AC
Input return loss 40 dB at 5 MHz
Input level 1 Vpp, 2 Vpp max 
Outputs 75 ohm, source terminated
Output gain ±3 dB adjustable
DC on output ±20 mV max
Output level 1 Vpp nominal
Frequency response -0.1 dB 10 Hz to 7 MHz
-3 dB at 9 MHz
Differential gain 0.5% max at 4.43 MHz
Differential phase 0.5° max at 4.43 MHz
LF response
Theme: Overlay by Kaira Extra Text
Cape Town, South Africa