La serie TPA110 è costituita da due coppie, trasmettitore e ricevitore, atti a trasmettere a distanza, tramite cavo CAT5 UTP, un segnale video ed un segnale audio stereo. Per applicazioni di semplice monitoria, utilizzando cavo UTP AWG22 la distanza copribile può raggiungere i 900 mt.
La coppia più completa, denominata TPA110 IRT / IRR, consente altresi il passaggio di un segnale IR. Fornisce inoltre la segnalazione visiva del corretto segnale video in arrivo e, tramite il contatto in scambio di un relè, ne consente il teleallarme o la segnalazione a distanza.
 |
-
Video e audio stereo Transmitter / Receiver
- Regolazione della compensazione
-
Segnalazione video in arrivo
-
Contatto in scambio per presenza video
-
Trasmissione IR bidirezionale
-
Carrier frequency up to 1.2MHz
-
Compatibile 19″
|
TPA110T / TPA110 IRT |
Video input type |
BNC, AC coupled |
Input return loss |
35 dB at 5 MHz |
Audio input type |
RCA socket, AC coupled |
Input impedance |
20 kohm |
Input level |
+10 dBm max |
Line OUT |
8 Phoenix screwtype detachable (four pairs balanced) |
IR IN |
3 Phoenix screwtype detachable |
IR OUT |
jacks mono 3.5 mm |
IR Signal type |
Carrier frequency up to 1.2 MHz |
|
TPA110R / TPA110200 IRR |
Line IN |
8 Phoenix screwtype detachable (4 pairs balaced) |
Video OUT |
BNC, not clamped |
Equalization /
Frequency response |
±1,5 dB from 30 kHz to 5 MHz up to 375 mt CAT5 AWG26 cable ±1,5 dB from 30 kHz to 5 MHz up to 500 mt CAT5 AWG24 cable
±1,5 dB from 30 kHz to 5 MHz up to 600 mt CAT5 AWG22 cable
|
Delay |
2,0 µS at 375 mt |
Differential gain |
0,6 % worst case |
Differential phase |
1,2° worst case |
LF response |
1,2% on 50 Hz square wave |
Hum & noise |
-70 dBm unweighted with 375 mt CAT5 AWG26 cable |
AUX (video presence) |
3 Phoenix crewtype detachable
C, NO, NC, dry contact |
IR IN |
3 Phoenix crewtype detachable |
Audio Out |
RCA socket |
Output level |
Adjustable for up to 375 mt CAT5 AWG26 cable
|
Max. output level
|
+10dBm
|
Output impedance
|
150
Ω
|
Audio response
|
-0.5 dB from 10Hz to 20KHz; -3 dB at 95 KHz
|
Distortion
|
0.04% from 20Hz to 20KHz at +6dBm
|
Crosstalk L/R (Worst case)
|
55 dB at 16KHz worst case
|
Hum & Noise
|
:-64 dBm unweighted through 350mt CAT5 cable
|
Video/Audio crosstalk
|
68 dB worst case through 350mt CAT5 cable
|
Audio/Video crosstalk
|
80 dB at 16 KHz through 350mt CAT5 cable
|
IR OUT |
jacks mono 3.5 mm |
IR signal type |
Carrier frequency up to 1.2 MHz |
|
GENERAL |
Main input
(with AC adapter ADM 001) |
230 Vac 50 Hz |
Power consumption |
5 VA |
Size (WxDxH) |
200 x 100 x 44 mm |
Weight |
0.5 Kg / each unit |
Operating temperature range |
0 – 45 °C |
Safety |
according to EN60065 |
EMC |
according to EN55103-1 and EN55103-2 |
