The HDTV Distributors and Switchers family deals with Y, Pb, Pr analog signal and associated SPDIF.
The 4×1 switcher and 4×4 matrix can also be operated by IR and RS232.
02 – HDMI DISTRIBUTORS
HDMI Distributors of the CLUX line are fully compatible with the v1.3 standard and represent the more advanced solution for HDMI digital signals distribution.
Outputs are buffered and can control HDMI cables up to a total length of 15 m.
03 – HDMI SWITCHERS
HDMI Switchers of the CLUX line are fully compatible with the v1.3 standard.
The 4×1 model can also be operated by IR.
04 – HDMI MATRIX SWITCHERS
HDMI Matrix Switchers can be found in 2×2, 4×2 e 4×4 format.
They are fully compatible with the HDMI 1.2 and HDCP 1.1 standards.
All models can be operated by IR and RS232.
05 – DVI DISTRIBUTORS & SWITCHERS
DVI Distributors, found in the 1×4 and 1×8 format can be cascaded up to 3 levels and can control cables up to a total length of 15 m.
All Switchers of this kind, proposed in the 3X1 and 8×1 format, can be operated by IR and the 8×1 model also by RS232.
Scan Converters are devices used for frequencies conversion of a graphic signal from a PC to a signal compatible with the Pal or NTSC TV standards.
Output signals are of the composite type (CV), S-VHS (Y/C) or component (RGB o Y, Pb, Pr).
Three models of Scan Converters are available which cover a wide range of applications.
07 – SCALERS
Scalers are devices which can convert a TV signal of the composite type (CV), S-VHS (Y/C) or component (Y, Cb, Cr) into an High Resolution signal such as RGBHV or Y,Pb, Pr.
Some of the models available can receive and transform also graphic signals for resolution changes.
Due to the HDMI importance, a model is also available that can deal with HDMI signal both on the input and output.
08 – SIGNAL FORMAT CONVERTERS
Signal Format Converters are devices used to convert a signal format while keeping its rate unchanged.
Special importance is given to the HDMI format for which 3 Converters are available.
The Pal/Ntsc/Secam Converters and the SCART to YUV original Converter are especially important.
09 – GENERATORS
Signal Generators are devices which generate a series of standard patterns used to test monitors and other video equipment.
Three kinds of generators are available which work on the PC or analog HDTV signals, DVI and HDMI.
The HDMI Generator, also controlled by IR and RS232, offers a wide range of 39 different patterns including an HDCP one.