CAT5 Input+Output Matrix have been designed to connect inputs and outputs through a CAT5 cable.

Sources are interfaced with a CAT5 transmitter while destinations are attended by a receiver.

Typical formats are 8×8, 16X8 e 16×16.

There are 2 kinds of Matrix:

– The CSW series is designed for UXGA & Audio signals conversion.

– The CSWP (more complete), which carries UXGA, Audio, RS232 & IR.

At a peripheral level, each transmitter is connected with a PC or another multimedia source, while each receiver is connected to one output (monitor or videoprojector).

Transmitters and receivers are chosen according to carried signals and CAT5 cable length in the system.

Matrix with CAT5 input & output are designed to connect several sources and destinations by a CAT5 cable.

CSW16X08S

CAT5 UXGA+Audio 16X8 matrix

Matrix with CAT5 input & output are designed to connect several sources and destinations by a CAT5 cable.

CSW16X16S

CAT5 UXGA+Audio 16×16 matrix

Matrix with CAT5 input & output are designed to connect several sources and destinations by a CAT5 cable.

Matrix with CAT5 input & output are designed to connect several sources and destinations by a CAT5 cable.

CSWP16X08S

CAT5 UXGA+Audio+RS232+IR 16X8 matrix

Matrix with CAT5 input & output are designed to connect several sources and destinations by a CAT5 cable.

CSWP16X16S

CAT5 UXGA+Audio+Rs232+IR 16×16 matrix

Matrix with CAT5 input & output are designed to connect several sources and destinations by a CAT5 cable.