The TPV200 series consists of two pairs, transmitter and receiver, designed for remote transmission, via CAT5 UTP cable, of two video signals.
For simple monitoring applications, a distance of up to 650 meters can be covered using a UTP AWG22 cable.
Technical Specifications
| TPV200T | |
|---|---|
| Video Input type | N°2 BNC, AC coupled |
| Input return loss | 35 dB at 5 MHz |
| Crosstalk (two sections) | 50 dB at 5 MHz |
| Line OUT | N°8 Phoenix screwtype detachable (4 pairs balanced) |
| TPV200R | |
|---|---|
| Line IN | N°8 Phoenix screwtype detachable (4 pairs balanced) |
| Video OUT | N°2 BNC, not clamped |
| Equalization / Frequency response from 30 KHz to 5 MHz | ±1.5 dB up to 375 m CAT5 AWG26 cable; |
| ±1.5 dB up to 500 m CAT5 AWG24 cable; | |
| ±1.5 dB up to 650 m CAT5 AWG22 cable; | |
| Delay | 2.0 µs at 375 m CAT5 cable |
| Differential gain | 0.6% worst case |
| Differential phase | 1.2° worst case |
| LF Response | 1.2% on 50 Hz squarewave |
| Hum & Noise | -70 dBm unweightedwith 375 m CAT5 AWG26 cable |
| Video1/video2 crosstalk | 37 dB at 5 MHz, worst case |
| **** | |
| Mains input | 230 VAC 50 Hz (with AC adapter ADM001) |
| Power consumption | 5 VA |
| Size (WxDxH) | 200x100x44 mm |
| Weight | 0.5 kg / Each unit |
| Operating temperature range | 0÷45°C |
| Safety | according to EN60065 |
| EMC | according to EN55103-1 and-2 |
- Suitable for Y/C signal
- Dual video Transmitter / Receiver
- Compensation adjustment
- 19″ compatible by ADR1U adapter
Brochure / leaflet for TPV200:
Elpro_TPV200.pdf
USER MANUAL:
User Instruction Manual for Elpro TPV200
Elpro_TPV200_user_manual_eng.pdf
CE CERTIFICATION:
CE Conformity document for TPV200
CE Conformity
High Resolution Images
Download here the available Hi-Res images of TPV200.