Elpro VideoLabs: equipaggiamento Audio-Video. Il miglior Scaler, Extender, Convertitore per professionisti e dilettanti

elp_back-7812839 brand_logo_elp-9584505 007820elpro_tzl400_1m-6822926 overlay_1-1590654zoom_in-1767691 007820elpro_tzl400_1m-6822926

TZL400 units converts a video signal into a high resolution RGBHV signal.

It can be used for videoprojection or onto TFT visualizer to improve picture quality.

The wide choice among 11 input signals, each with the combined audio, makes the TZL400 very useful in the presentation domain, where many sources, either video or graphics, must be displayed onto a single destination.

TZL400 features the “through blank” switching where the switching time is user-adjustable to permit the perfect matching with the destination device.

Two microphones (one is line level type) can be connected to the TZL400 and then mixed with or replacing the outgoing audio.

TZL400 provides 8 dry contacts for room control function.

TZL400 manages two IR receivers, two IR transmitters and 5 common outputs to control either itself and some other remote appliances (tipically DVD players, SAT receivers etc.).

Technical Specifications

VIDEO
Inputs N°3 CV; N°3 Y/C; N°1 Y, Cb, Cr
N°4 Graphic (active bypass) with HDD 15 p.f.
Outputs Twin, High resolution with HDD 15 p.f.
Output Format Graphic SVGA, XGA, SXGA
YPbPr 480p, 576p, 720p, 1080i
Standard PAL, SECAM, NTSC
Synch. level TTL
Vertical synch. 60 Hz
Switching Through blank, with switching time user-adjustable
DRY CONTACTS
Arrangement N°6 SPSTON-OFF; N°2 SPDT ON-OFF
Ratings Max 0.5A at 48 V
IR CAPABILITY
Power supply External, by adapt.:+12VDC, GND on Sleeve
IR IN N°2 receiver with Phoenix screwtype
IR OUT N°2 transmitter with 3.5 mm jack socket
IR OUT common N°5 transmitter with 3.5 mm jack socket
AUDIO
Inputs N°11 unbalanced with RCA outlet
Input coupling AC
Input impedance 56KΩ
Input level +9 dBm Max.
Frequency response -1 dB from 20 Hz to 60 KHz
Crosstalk 60 dB at 5 KHz
Distortion
Hum & Noise -75 dBm unweighted
Outputs N°1 Unbalanced, 150Ω, with RCA outlet
N°1 Balanced, 600Ω, with Phoenix screwtype
Output level Adjustable in 8 steps on the balanced output by IR RS232/485 control
MIC inputs N°1 micro level, N°1 line level (-20 dBm)
MIC Outputs N°1 Line level, unbalanced
EFFECTS Inputs +9 dBm Max, unbalanced
Remote control IR, RS232, RS485
****
Mains inputs 90÷240 VAC 50-60 Hz
Power consumption 15 VA
Size (WxDxH) 483x210x132 mm
Weight 6 kg
Operating temperature range 0÷45°C
Safety according to EN 60065
EMC according to EN 55103-1 and EN 55103-2

linkbut1-6379376 linkbut2-1244905
linkbut3-1218037 linkbut4-2628428

  • 11 inputs with combined audio
  • Switching through blank with user-adjustable time
  • Twin high resolution outputs
  • Buffer on high resolution outputs
  • Output format selectable
  • VCA on audio balanced output
  • Maintenance of settings
  • IR control provided
  • 2 microphone inputs (1 line level)
  • 8 contacts for room control
  • 2 IR Receivers/Transmitters
  • Controlled by RS232

Brochure / leaflet for TZL400:
Elpro_TZL400.pdf

USER MANUAL:

User Instruction Manual for Elpro TZL400
Elpro_TZL400_user_manual_eng.pdf

CE CERTIFICATION:

CE Conformity document for TZL400
CE Conformity

WINDOWS DRIVERS

Control Software for LIN102, LIN103, LIN104, LIN105 and for MDL200, TZL300 and TZL400
SCALER_LIN10X_driver_1_6.zip

Available Software:

Software to upload firmware into Elpro units
Elpro_uploader.zip

FIRMWARE

Firmware updating of the Elpro devices is possible using the specific utility UPLOADER.

This software should be downloaded and installed on a PC in a Windows environment.

To perform the updating of the firmware it is necessary to connect the device to the PC serial line and therefore to perform the action (typical for every device) to put the device in UPGRADE MODE.

Then load the .hex file of the new firmware version and start uploading to the device.

At the conclusion of the updating it is necessary to turn OFF and ON again the device.

How to set the TZL400
in UPGRADE MODE

Turn the device ON holding the key PC4 pressed.

The UPGRADE MODE is signaled with the led Resolution 480p and 576p lighted.

Notes: Immediate execution of SEQUENCE command and bugs removing.

Current release: 1.5

MD5: F797FE151CD19B382BEC98F90A83EFBB

Elpro_FW_TZL400r15.zip

High Resolution Images

Download here the available Hi-Res images of TZL400.

007820elpro_tzl400_1m-6822926

Theme: Overlay by Kaira Extra Text
Cape Town, South Africa