Based on brand-new XIO platform, XIO 9020-ENS-4AUD is a high-quality converter which converts one SD-SDI signal to two analog composite video signals, and outputs one SDI signal. Output signals go through frame sync processing.
Simultaneously, two analog audio stereo signals are extracted from the SDI signal.
The de-embedded audio group can be selected though DIP Switch.
The de-embedded mode of audio channels is also selectable, such as following input channels, crossing output, mixing output and so on.
XIO 9020-ENS-4AUD supports 625i 50 and 525i 60 format for input signal.
XIO 9020-ENS-4AUD provides automatic signal equalization for up to 280 m. (Belden 1694A), which can improve the signal quality and reduce the signal loss caused by long distance transmission of input source.
The LED lights on the module indicate the status of input signal and power supply, in order to let the user know the status immediately.
XIO 9020-ENS-4AUD supports SNMP, and it can be real-time managed and monitored by XIO NET, the Network Management Module, via Ethernet.
Technical Specifications
| DIGITAL VIDEO | |
|---|---|
| INPUT | |
| Input interface | 1, SD-SDI, BNC |
| Impedance | 75 Ω |
| Format | 525i 60, 625i 50 |
| SMPTE 259M-C 270Mb/s | |
| Max length | 280 m. (Belden 1694A) |
| **** | |
| OUTPUT | |
| Output interface | 1, SD-SDI, BNC |
| Impedance | 75 Ω |
| Format | Follows input format |
| Eye pattern | 800mV±5% |
| Jitter |
| ANALOG VIDEO | |
|---|---|
| REFERENCE INPUT | |
| Input type | Analog composite synch. |
| Input interface | 1, Ref, BNC |
| Standard | PAL/NTSC |
| Impedance | 75 Ω |
| **** | |
| OUTPUT | |
| Output interface | 2, CVBS, BNC |
| Impedance | 75 Ω |
| Standard | PAL/NTSC |
| ANALOG AUDIO OUTPUT | |
|---|---|
| Output signal | 4, Analog |
| Interface | 3 pin conn., balanced |
| Impedance | 600 Ω |
| Bandwidth | -3 dB at 23 KHz, +16dBu |
| OTHER SPECIFICATIONS | |
|---|---|
| Status Indicator | Input signal status indicator |
| Power indicator (indicated by lighting on or off of the green LED) | |
| Power consumption | 3 W |
- Support 625i 50 and 525i 60 format for input signal.
- Provides an individual Ref interface and frame sync processing.
- Hot swap plug.
- Select de-embedded audio group though DIP Switch.
- Automatic signal equalization for up to 280 m. (Belden 1694A).
- LED lights indicate the status of signals and power supply.
- Supports SNMP, and can be real-time managed and monitored by XIO NET via Ethernet.
- Widely used in broadcasting system, studios and other professional fields.
User instruction manual for XIO-9020-ENS-4AUD.Info contained in the manual may not properly match with the delivered product, please check on the SPECS page or contact our office.
XIO_9020ENS-4AUD_User_Manual_V1_0.pdf
CE CERTIFICATION:
CE Conformity document for XIO-9020-ENS-4AUD
CE Conformity
High Resolution Images
Download here the available Hi-Res images of XIO-9020-ENS-4AUD.