Elpro VideoLabs: equipaggiamento Audio-Video. Il miglior Scaler, Extender, Convertitore per professionisti e dilettanti

elp_back-5478139 brand_logo_elp-3739234 003120elpro_dvipro100_1m-1607940 overlay_1-9362818zoom_in-2608741 003120elpro_dvipro100_1m-1607940

DVIPRO100 is a unit that transforms the incoming video and PC inputs in a RGBHV and DVI signals.

The two outputs are simultaneous and both present the same resolution.

By IR control or by RS232 it’s possible to change several parameters to adjust the image.

Besides the Scaler function, the DVIPRO100 provides the PIP (Picture in Picture) between a video overlayed into a PC source.

Both can be scaled separately pixel by pixel and moved in X and Y position on the screen (PAN).

The Scaler and PIP features and the presence of the combined audio to each input, makes the DVIPRO100 very useful in the presentation systems where several sources must be displayed onto RGBHV and DVI destinations.

Technical Specifications

Inputs N°1 CV; N°1 Y/C
N°1 CV or YCbCr
N°2 Graphic
Input formats PAL, SECAM, NTSC
Outputs N°1 DVI-D output
Outputs N°1 High resolution with HDD 15 p.f.
Output Format Selectable SVGA, XGA, SXGA and HDTV 480p, 576p, 720p, 1080i
Standards PAL, SECAM; NTSC
Synch. Level TTL
Vertical synch. 60 Hz
PIP Video on PC
UpScale & DownScale pixel x pixel
Pan of both images in X and Y
Inputs N°5 unbalanced with RCA outlet
Input coupling AC
Input impedance 56KΩ
Input level +9 dBm Max
VCA on outputs from MUTE to 100% (33 steps)
Frequency response -1 dB from 40 Hz to 20 KHz
Crosstalk 60 dB at 5 KHz
Hum & Noise -75 dBm unweighted
Outputs N°1 Unbalanced, 150Ω with RCA outlet
N°1 Balanced, 600Ω with Phoenix screwtype
Remote control IR, RS232, LAN
Mains inputs 90÷240 VAC 50-60 Hz
Power consumption 15 VA
Size (WxDxH) 483x210x44 mm
Weight 3 kg
Operating temperature range 0÷45°C
Safety according to EN 60065
EMC according to EN 55103-1 and EN 55103-2

linkbut1-4020691 linkbut2-1609004
linkbut3-6465814 linkbut4-9370236

  • Outputs resolution up to 1280×1024 and 1080i
  • ‘Seamless’switching with fading
  • 5 separate inputs with combined audio
  • Setup saving and recalling
  • PIP: Video on PC
  • Pixel x Pixel Upscale and Downscale of images
  • Pan of images in PIP
  • Optional IR control
  • Controlled by RS232
  • Audio output level control
  • Optional LAN control

Brochure / leaflet for DVIPRO100:


User Instruction Manual for Elpro DVIPRO100


CE Conformity document for DVIPRO100
CE Conformity


Application notes for DVIPRO100

User manual for LAN202


Control Software for DVIPRO100, DVIPRO1000, DVIDEC100 and DVISEL403

Available Software:

Software to upload firmware into Elpro units

Software for Ethernet interface configuration and virtual COM management – Win 32bit
150727 Tibbo tdst-5-09-12-x86-01.zip

Software for Ethernet interface configuration and virtual COM management – Win 64bit
150727 Tibbo tdst-5-09-12-x64-01.zip


Firmware updating of the Elpro devices is possible using the specific utility UPLOADER.

This software should be downloaded and installed on a PC in a Windows environment.

To perform the updating of the firmware it is necessary to connect the device to the PC serial line and therefore to perform the action (typical for every device) to put the device in UPGRADE MODE.

Then load the .hex file of the new firmware version and start uploading to the device.

At the conclusion of the updating it is necessary to turn OFF and ON again the device.

How to set the DVIPRO100

Move the dip-switches 2 and 3 in ON position (rear side), then turn the DVIPRO100 on.

Current release: 1.2

MD5: 4CD9F139AB244D280852AA954CA014BD


High Resolution Images

Download here the available Hi-Res images of DVIPRO100.


Theme: Overlay by Kaira Extra Text
Cape Town, South Africa