Elpro VideoLabs: equipaggiamento Audio-Video. Il miglior Scaler, Extender, Convertitore per professionisti e dilettanti

elp_back-2154787 brand_logo_elp-4755362 007420elpro_tz32a_1m-4773193 zoom_in-5104924 007420elpro_tz32a_1m-4773193

The TZ32A unit is a 32×32 audio stereo matrix with balanced inputs and outputs.

It can work in single mode or combined with the TZ32V video.

The TZ32A can be controlled through the integrated keyboardoard, from computer with RS232 or RS485 interface and IR control.

Moreover it can be driven via link when connected to the TZ32V video matrix.

Technical Specifications

Technical Specifications TZ32A
Input/output type Differential, with Phoenix screwtype, removable
Input coupling AC
Input impedance 13KΩ
Input level +18 dBm max (balanced)
Output impedance 600Ω
Frequency response -1 dB from 3 Hz to 600 KHz
Distortion
Crosstalk (worst case) 60 dB at 20 KHz
Hum & Noise -80 dBm unweighted
Remote control IR, RS232, RS485 linkable with TZ32V
****
Mains input 230 VAC / 115 VAC (selectable)
Power consumption 10 VA
Size (WxDxH) 483x130x176 mm
Weight 6 kg
Operating temperature range 0÷45°C
Safety according to EN60065
EMC according to EN55103-1 and-2

linkbut1-4400717 linkbut2-1577060
linkbut3-7047315 linkbut4-7653025

  • Balanced audio
  • Inputs/outputs with Phoenix screwtype, removable
  • Keypad programmable preview output
  • 12 presets can be recalled
  • Mapping capability
  • IR remote control (optional)
  • Linkable to TZ32V

Brochure / leaflet for TZ32A:
Elpro_TZ32A.pdf

USER MANUAL:

User Instruction Manual for Elpro TZ32A
Elpro_TZ32A_user_manual_eng.pdf

CE CERTIFICATION:

CE Conformity document for TZ32A
CE Conformity

DOCUMENTATION FILES

How to control TZ32 by CNS1000
CNS1000_conn_TZ32_eng.pdf

WINDOWS DRIVERS

Control Software for TZ32V and TZ32A
TZ32_driver_1_0_b_4.zip

Available Software:

Software to upload firmware into Elpro units
Elpro_uploader.zip

FIRMWARE

Firmware updating of the Elpro devices is possible using the specific utility UPLOADER.

This software should be downloaded and installed on a PC in a Windows environment.

To perform the updating of the firmware it is necessary to connect the device to the PC serial line and therefore to perform the action (typical for every device) to put the device in UPGRADE MODE.

Then load the .hex file of the new firmware version and start uploading to the device.

At the conclusion of the updating it is necessary to turn OFF and ON again the device.

How to set the TZ32A
in UPGRADE MODE

Turn the TZ32A ON holding the key 3 pressed.

The UPGRADE MODE is signaled by message ELPRO VIDEO LABS — Update Firmware

Notes: Memorization on non-volatile memory of the Audio connections

Current release: 1.2

MD5: AEF9340E0D593E81F583D4C253D859A3

Elpro_FW_TZ32Ar12.zip

High Resolution Images

Download here the available Hi-Res images of TZ32A.

007420elpro_tz32a_1m-4773193

Theme: Overlay by Kaira Extra Text
Cape Town, South Africa