SDI04-2 is a 1×4 distribution amplifier for 3G/HD/SD-SDI signals.
The input circuitry of this device permits the compensation of the losses of the coax cable that brings the incoming signal.
The compensation capability changes with the resolution of the signal and with the type of cable.
Outputs are reclocked to ensure low jitter and optimal rise-fall times. For HD or 3G standard the Belden 1694A coax cable is recommended.
Technical Specifications
| Technical Specifications SDI04-2 | |
|---|---|
| Input / Output Interface | BNC x 5 (75Ω) |
| SDI Standard | SMPTE 259M – SD-SDI (270 Mbps) |
| SMPTE 292M – HD-SDI (1.485 Gbps) | |
| SMPTE 424M – 3G-SDI (2.97 Gbps) | |
| Input compensation capability with Belden 1694A coax cable: | SD-SDI: 400 m |
| HD-SDI: 130 m | |
| 3G-SDI: 50 m | |
| Output amplitude | 800 mV |
| Output Jitter | 3G operation (2.97 Gbps) Typical 0.07 UI p-p |
| HD operation (1.485 Gbps) Typical 0.04 UI p-p | |
| SD operation (270 Mbps) Typical 0.02 UI p-p | |
| Power Supply | DC 5V 1Amp |
| Power Consumption | 500 mA (Max) |
| Operation Temperature | 0 to 55°C |
| Storage Temperature | -20 TO 85°C |
| Dimensions | 88 x 75 x 30 mm (H) |
| Weight | 220 g |
- 3G/HD/SD-SDI re-clocking 1 in 4 out distribution amplifier
- Provides automatic input equalization up to 400 m. (SD-SDI)
- Supports SD (SMPTE 259M), HD (SMPTE 292M), 3G (SMPTE 424M)
User instruction manual for SDI04-2
she_SDI04D-2_User_Manual.pdf
CE CERTIFICATION:
CE Conformity document for SDI04-2
CE Conformity
High Resolution Images
Download here the available Hi-Res images of SDI04-2.