The TZ32A unit is a 32×32 audio stereo matrix with balanced inputs and outputs.
It can work in single mode or combined with the TZ32V video.
The TZ32A can be controlled through the integrated keyboardoard, from computer with RS232 or RS485 interface and IR control.
Moreover it can be driven via link when connected to the TZ32V video matrix.
|Technical Specifications TZ32A|
|Input/output type||Differential, with Phoenix screwtype, removable|
|Input level||+18 dBm max (balanced)|
|Frequency response||-1 dB from 3 Hz to 600 KHz|
|Crosstalk (worst case)||60 dB at 20 KHz|
|Hum & Noise||-80 dBm unweighted|
|Remote control||IR, RS232, RS485 linkable with TZ32V|
|Mains input||230 VAC / 115 VAC (selectable)|
|Power consumption||10 VA|
|Size (WxDxH)||483x130x176 mm|
|Operating temperature range||0÷45°C|
|Safety||according to EN60065|
|EMC||according to EN55103-1 and-2|
- Balanced audio
- Inputs/outputs with Phoenix screwtype, removable
- Keypad programmable preview output
- 12 presets can be recalled
- Mapping capability
- IR remote control (optional)
- Linkable to TZ32V
Brochure / leaflet for TZ32A:
User Instruction Manual for Elpro TZ32A
CE Conformity document for TZ32A
How to control TZ32 by CNS1000
Control Software for TZ32V and TZ32A
Software to upload firmware into Elpro units
Firmware updating of the Elpro devices is possible using the specific utility UPLOADER.
This software should be downloaded and installed on a PC in a Windows environment.
To perform the updating of the firmware it is necessary to connect the device to the PC serial line and therefore to perform the action (typical for every device) to put the device in UPGRADE MODE.
Then load the .hex file of the new firmware version and start uploading to the device.
At the conclusion of the updating it is necessary to turn OFF and ON again the device.
How to set the TZ32A
in UPGRADE MODE
Turn the TZ32A ON holding the key 3 pressed.
The UPGRADE MODE is signaled by message ELPRO VIDEO LABS — Update Firmware
Notes: Memorization on non-volatile memory of the Audio connections
Current release: 1.2
High Resolution Images
Download here the available Hi-Res images of TZ32A.