The DVR-MVRK unit is a 19″ , 2RU 320mm-deep rack designed to house all Elpro plug-in. The DVR-MV-RK must be installed on standard 19″ cabinets.
As all Elpro plug-in are equipped with power supply, there is no need to fit power supply units in the DVR-MVRK rack. Power is distributed to the plug-in by the wiring inside the rack using three-pin connectors.
On the back, the DVR-MV-RK is equipped with a panel type mains plug in which the power cord provided must be inserted. The mains plug group includes the ON/OFF switch and a 5×20 fuse whose characteristics are screen-printed on the panel.
The DVR-MVRK has been constructed according to EN60065 safety standards.
It can house up to a maximum of 7 plug-in.
The plug-in consist of two parts, i.e. a fixed part that houses the connectors for connection of the input/output signals, to be fastened on the back of the rack, and a mobile extractable part to be inserted in the front part of the rack.
Coupling of the two parts is assured by edge connectors.
Any free slots can be covered with the BLK10TE panels.
|Technical Specifications DVR-MVRK|
|Mains input||230 VAC 50 Hz|
|Size (WxDxH)||483x320x88 mm|
|Operating temperature range||0÷45°C|
|Safety||according to EN60065|
|EMC||according to EN55103-1 and-2|
Brochure / leaflet for DVR-MVRK:
CE Conformity document for DVR-MVRK
High Resolution Images
Download here the available Hi-Res images of DVR-MVRK.