This HDMI/VGA over IP Extender is a multi-function receiver device that supports the reception of a signals up to 4K2K 30Hz. It features HDMI and VGA outputs selectable by slide switch.
Additionally, this system includes extra functions like bidirectional IR passthrough for control of devices. Analog line level out with microphone input level are provided.
The USB function allows the system to act like USB hub, allowing the system to be used as a KVM switch.
Adding extra devices allows the user to cascade the system enabling them to extend the transmission distance without signal loss or introducing delay.
Featuring extensive user-friendly control options, the transmitter and receiver set can be controlled by OSD, Telnet, IR Remote, WebGUI and RS-232 commands.
|Technical Specifications CH-U330RX|
|Output Ports||1x HDMI|
|1x MIC in|
|1x Line out|
|1x IR Emitter|
|1x IR Extender|
|2 x USB 1.1 (for keyboard and mouse)|
|2 x USB 2.0 (for thumb drive and USB2.0 supported device, the USB camera or external hard disk with USB interface are not supported)|
|Input Port||1x CAT5e/6|
|Other||1x RS232 (Bypass only)|
|IR Frequency||30 ~ 50 kHz|
|Support Resolutions for HDMI output||480p ~ 1080p at 24/50/60Hz|
|4K2K at 30Hz RGB|
|Support Resolutions for VAG output||1920x1200p at 60Hz (RB)|
|Baud Rate||300~115200 bps (default at 115200 bps)|
|Power Supply||5VDC/ 4A (US/EU standards, CE/FCC/ UL certified)|
|Dimensions||180 x 100 x 30 mm (H) jack excluded|
|180 x 110 x 30 mm (H) jack included|
- HDMI, 4K2K 30 Hz or 60 Hz at YUV 420 and HDCP 2.2
- Supports HDMI and VGA outputs
- Supports audio line out and microphone input
- Supports USB keyboard and mouse extension
- Device can be controlled via OSD, Telnet, WebGUI, IR remote and RS-232
User instruction manual for CH-U330RX
CE Conformity document for CH-U330RX
High Resolution Images
Download here the available Hi-Res images of CH-U330RX.
Similar devices you may also be interested to check out: