The HDTV Distributors and Switchers family deals with Y, Pb, Pr analog signal and associated SPDIF.
The 4x1 switcher and 4x4 matrix can also be operated by IR and RS232.
HDMI Distributors of the CLUX line are fully compatible with the v1.3 standard and represent the more advanced solution for HDMI digital signals distribution.
Outputs are buffered and can control HDMI cables up to a total length of 15 m.
HDMI Switchers of the CLUX line are fully compatible with the v1.3 standard.
Some types can also be operated by IR and/or RS232.
HDMI Matrix Switchers can be found in 2x2, 4x2, 4x4 and 8x8 format.
The most recent models are compatible with HDMI 1.4 and adopt the HDBaseT™ technology.
All models can be operated by IR and RS232.
DVI Distributors, found in the 1x4 and 1x8 format can be cascaded up to 3 levels and can control cables up to a total length of 15 m.
All Switchers of this kind, proposed in the 3X1 and 8x1 format, can be operated by IR and the 8x1 model also by RS232.
DP family manages signals belonging to DP standard 1.1 version.
Some distributors and one converter from DP to HDMI are offered.
Scan Converters are devices used for frequencies conversion of a graphic signal from a PC to a signal compatible with the Pal or NTSC TV standards.
Output signals are of the composite type (CV), S-VHS (Y/C) or component (RGB o Y, Pb, Pr).
Three models of Scan Converters are available which cover a wide range of applications.
Scalers are devices which can convert a TV signal of the composite type (CV), S-VHS (Y/C) or component (Y, Cb, Cr) into an High Resolution signal such as RGBHV or Y,Pb, Pr.
Some of the models available can receive and transform also graphic signals for resolution changes.
Due to the HDMI importance, a model is also available that can deal with HDMI signal both on the input and output.
Signal Format Converters are devices used to convert a signal format while keeping its rate unchanged.
Special importance is given to the HDMI format for which 3 Converters are available.
The Pal/Ntsc/Secam Converters and the SCART to YUV original Converter are especially important.
Audio processors are a group of devices suited to manage the Audio signal to make it compatible with all the applications.
This family includes 2 Volume Leveler and 2 A to D and D to A converters.
Signal Generators are devices which generate a series of standard patterns used to test monitors and other video equipment.
Three kinds of generators are available which work on the PC or analog HDTV signals, DVI and HDMI.
The HDMI Generator, also controlled by IR and RS232, offers a wide range of 39 different patterns including an HDCP one.
This family of transceivers brings at various distances through a CAT6 cable an HDMI signal.
Four types of transceivers are offered, starting from the most basic CH-107-TX/RX that carries the HDMI only, to the most sophisticated CH-1109-TX/RX that carries the HDMI, RS232, IR and IP.
The achievable distances, with 1080p resolution, start from 45 m to 90 m using AWG23 CAT6 cable.
Mixed devices are also availble, with standard HDMI inputs and CAT6 outputs. This is the case of a simple distributor like the CLUX-1H4CAT or a matrix like the CLUX-4H4CAT.
In this case it's necessary, to complete the system, to add a number of CAT6 receivers equal to the outputs of the transmitter.
In the family is offered as well an optical transceiver capable to carry the HDMI signal up to 300 m
Fiber Optics is the only alternative when distances that need to be covered are more than cables allow, or when we need to cross an ambiance that is especially infected from the electrical noise.
Transceivers for both HDMI and 3G/HD/SD-SDI signals are offered.
This category includes all the products not mentioned in the previous families.
Devices that feature solutions in the distribution and switching of SD/HD/3G-SDI signals, digital Mixers, Video Wall solutions, CEC Controllers, HDMI Patch Panels, IR repeater on CAT5 and many others are offered.