Italiano  |  English  |  LOGIN  |  CONTATTA
SEARCH  

13 - Elpro Broadcasting

CONVI107

SD-SDI to PAL+PAL+Y/C or YUV or RGB Converter

broadcast CONVI107 broadcast CONVI107 broadcast CONVI107

 

CONVI107 is a plug-in which makes the conversion from SD-SDI 270Mb/sec to analogic.

The available signals on the output are 4:

N° 1 fixed PAL

N° 3 programmable as follows:

- N° 1 PAL + N°1 Y/C or

- N° 1 YUV

- N° 1 RGB with incorporated synch.

On the board 6 jumpers allow programming of type of outputs, along with the generation of a 75% color bar generator signal.

The analogic signals on the output may be calibrated with the help of a trimmer on the front panel (GAIN). No phase corrections are possible.

Technical Specifications

Technical Specifications CONVI107
Input type75Ω ITU-R 601
Input ret. Loss25 dB at 270 MHz
Input level nominal800 mVpp on 75Ω
Output level nominal (analog)700 mVpp (plus sync)
Output level regulation500 mVpp ÷ 1 Vpp
Output ret.loss (all outputs)20 dB at 5 MHz
PAL differential Phase0.8 Degree
PAL differential Gain0.8 %
Frequency filter response (Luminance only)
Extended (5 off 6 off)-3 dB point at 5.5 MHz
-0.2 dB at 4 MHz
-1.4 dB at 5 MHz
-3.7 dB at 5.75 MHz
LPF (5 off 6 ON)-3 dB point at 4.9 MHz
-0.6 dB at 4 MHz
-3.4 dB at 5 MHz
-8.0 dB at 5.75 MHz
NOTCH (5 ON 6 off)-3 dB point at 2.6 MHz
-16 dB at 4 MHz
-26 dB at 5 MHz
-32 dB at 5.75 MHz
Frequency response (Chroma only)
All filter-3 dB point at 2.4 MHz
****
Mains input+40 VDC Max
Power consumption7.5 VA
Size (WxDxH)350x124x24 mm
Weight0.3 Kg
CE Mark



Downloads

BROCHURE:

Brochure / leaflet for CONVI107:
Elpro_Broadcast_CONVI107_ita.pdf

USER MANUAL:

User Manual for Elpro Broadcast CONVI107
Elpro_CONVI107_user_manual_eng.pdf

High Resolution Images

Download here the available Hi-Res images of CONVI107.

broadcast CONVI107 broadcast CONVI107 broadcast CONVI107

 

 


© 2018 Elpro Video Labs. All rights reserved.