-
- New Products
- New Products
-
- Know-How
- Elpro Warranty
- RAI Broadcasting
- Know-How
NEW PRODUCTS
Elpro Videolabs is always working to reach excellence in its production.
As new products will be developed you will find in this page the respective info.
NEW PRODUCT LINE by ELPRO
09 - WALL PLATES
Elpro Wall Plates are passive modules that permit to interface video, audio and data devices with the fixed wiring of the plants providing for a valid technical and aesthetical solution.
Example:
WP000
3 modules frame for EU standard box
- Provided with 2 blank modules WP060
==== OTHER NEW PRODUCTS ====
AT002
Remote Cable Tester
AT002 is a portable useful tool to test the assembled cables before their definitive installation. It's suited to control RJ45, BNC and USB cables.
AVS-SCLHD402/AP3
4 IN (2 VGA+2 DVI) Twin DVI/HDMI Out
AVS-SCLHD402/AP3 is a scaler that provides high quality up or down scaling of N°4 inputs, of which N°2 VGA or YPbPr and N°2 DVI-D or HDMI.
AVS-SCLHD1002/AP2
10 IN (2 CV, 2 Y/C, 4 VGA, 2 DVI), Twin DVI Out
The AVS-SCLHD1002/AP2 is a scaler quite similar to the model AP1 with the difference that it presents a twin DVI-D output instead of VGA. This Scaler accepts up to 10 input signals with 4 different formats, DVI/HDMI included.
CA-USBHU100R
HDMI+USB+RS232+IR IP 1Gbit Receiver
The receiver CA-USBHU100R forms a pair with transmitter CA-USBHUT the to allow HDMI and or USB host device to send data within a 100 meters CAT6 LAN distance while offering expandability for up to 4 USB outputs to perform multiple tasks.
CA-USBHUT
HDMI+USB+RS232+IR 1Gbit IP Transmitter
The transmitter CA-USBHUT forms a pair with the receiver CA-USBHU100R to allow HDMI and or USB host device to send data within a 100 meters CAT6 LAN distance while offering expandability for up to 4 USB outputs to perform multiple tasks.
CDVI-301RX
DVI-D to CAT6 Receiver
The CDVI-301RX Receiver over One CAT6 is a device for extending your DVI-D signal over medium distances to a compatible display.
CDVI-301TX
DVI-D to CAT6 Transmitter
The CDVI-301TX Transmitter over One CAT6 is a device for extending your DVI-D signal over medium distances to a compatible display.
CDVI-301TX/RX
DVI-D to CAT6 Transceiver
The CDVI-301TX/RX Transceiver over One CAT6 is a device for extending your DVI-D signal over medium distances to a compatible display.
CFSW-51MHL
5x1 HDMI Switcher w/ MHL (Mobile High Definition Link)
CFSW-51MHL is a five input and one output HDMI switcher with MHL (Mobile High-Definition Link) support integrated on its fifth input port.
CH-301RX
HDMI 1.3 to CAT6 Receiver
CH-301RX Receiver over One CAT6 is a device for extending your HDMI signal over long distances to a compatible display.
CH-301TX
HDMI 1.3 to CAT6 Transmitter
CH-301TX Transmitter over One CAT6 is a device for extending your HDMI signal over long distances to a compatible display.
CH-301TX/RX
HDMI 1.3 to CAT6 Transceiver
CH-301TX/RX Transceiver over One CAT6 is a device for extending your HDMI signal over long distances to a compatible display.
CH-322
3D Demultiplexer
CH-322 Demultiplexer permits to show the 3D contents through your existing 2D display equipments.
CH-506RX
HDMI+RS232+IR to CAT6 Receiver
CH-506RX belongs to the high performance HDMI transceivers family.
CH-506TX
HDMI+RS232+IR to CAT6 Transmitter
CH-506TX belongs to the high performance HDMI tranceivers family.
CH-506TX/RX
HDMI+RS232+IR to CAT6 Transceiver
CH-506TX/RX belongs to the high performance HDMI Transceivers family.
CH-507RX
HDMI 1.4, RS232, IR, LAN to CAT6 Receiver
The CH-507RX is the receiver part of the pair CH-507TX/RX.
CH-507TX
HDMI 1.4, RS232, IR, LAN to CAT6 Transmitter
The CH-507TX is the transmitter part of the pair CH-507TX/RX.
CH-507TX/RX
HDMI 1.4, RS232, IR, LAN to CAT6 Transceiver
The transceiver CH-507TX/RX belongs to HDBaseT™ family devices that provides the 5Play™ convergence feature.
CH-1107TX
HDMI to One CAT6 Transmitter
The CH-1107TX HDMI 1.3 transmitter over one only CAT6 is an extension tool for your long distance HDMI display needs.
CH-A1
3D Mini HDMI Analyzer
The CH-A1 3D mini HDMI Analyzer is a useful tool for checking both source and display HDMI devices.
COH TX1/RX1
HDMI 1.2 Optical Transceiver
Optical Transceiver for HDMI signal.
CLUX-11SA
HDMI Repeater and full Audio Extractor
CLUX-11SA is a solution for HDMI to HDMI repeater with Audio decoder.
CLUX-210S
1x10 HDMI Splitter w/ 2x1 Input Switcher
CLUX-210S belongs to the HDMI v1.3 Distribution Amplifier Series that's the most advanced solution to HDMI signal distribution.
CLUX-3D12S1A
1x2 HDMI Splitter w/ 3D Audio to Amplifier
CLUX-3D12S1A is an 1 x 2 HDMI distribution amplifier with a 3rd audio out compliance with HDMI 1.3.
CLUX-M2SDI
CV, Y,CbCr, VGA, HDMI to HDMI + 3G SDI Scaler
The HDMI/PC/Component/CV to 3G SDI/HDMI Scaler allows you to upscale HDMI/PC/Component/Composite signals to high definition video of HDMI formats (720p at 50/60Hz or 1080p at 50/60Hz) and SDI formats (HD-SDI SMPTE 292M or 3G-SDI 424M/425M).
CLUX-SDI2CSS
3G SDI to CV/SV Converter w/ Audio
The CLUX-SDI2CSS, SDI to CV/SV converter with audio allows 3G/HD/SD-SDI signals to be displayed on CV/SV displays or to be directed to a destination compatible only with PAL or NTSC systems.
CLUX-SDI2OF + CLUX-OF2SDI
SDI over Optical Transceiver
The SDI to Optical Fiber Extender is a pair of tool to extend your 3G/HD/SD-SDI signals over Optical Fiber for long distance transmission up to 10km.
CM-397M
PC/Component (YCbCr) to PC up to WXGA Scaler
This is an analog CGA (RGB) or Component (YCbCr) to PC scaler box that can scale signal to 3 different PC modes of VGA, XGA or WXGA.
CMPRO-4H2H
4x2 HDMI 1.4 Matrix
The CMPRO-4H2H is a 4 x 2 HDMI matrix which allows HDMI signal from any of its four sources to be routed to and displayed on any of its two connected HDMI displays.
CMSI-8D8DS
8x8 DVI Matrix
The CMSI-8D8DS 8 x 8 DVI-D Matrix allows DVI-D signal from any of it eight sources to be routed to and displayed on any of its eight connected DVI-D monitors or HDTV simultaneously.
CMSI-8D8DSA
8x8 DVI + Audio Matrix
The CMSI-8D8DSA 8 x 8 DVI-D Matrix with Audio allows DVI-D signal from any of it eight sources to be routed to and displayed on any of its eight connected DVI monitors or HDTV simultaneously.
CMSI-8H8CV
8x8 HDMI to Single CAT6 Matrix
This HDBaseT™ 8 x 8 HDMI Matrix over CAT6 supports the transmission of 8 HDMI signals with embedded multichannel audio towards 8 CAT6 outputs permitting to place the receivers to a distance up to 100 m. even with 1080p resolution.
CMSI-8H8HS
8x8 HDMI Matrix
The 8÷8 HDMI Matrix supports the transmission of Video (up to 1080p Full HD/1920÷1200@60 Hz) with multichannel digital audio from up to eight high definition sources to up to eight HDMI outputs.
CP-MHD421
Quad Video Processor
This High Definition QUAD Video Processor that can accepted four HDMI High Definition video sources input and compress it into one QUAD video output.
CS-801H
Ultra High Resolution Scaler w/3D
This high performance video processor allows 3D movies to be watched on a 2D display.
CSI-8H8CV2IR
8 HDMI to CAT6 Point to Point Transmitter with IR matrix
The CSI-8H8CV2IR is an 8 HDMI over CAT6 Point to Point Transmitter with IR matrix that supports the transmission of Video (up to 1080p Full HD/1920÷1200 60 Hz) with multichannel digital audio from up to 8 high definition sources to up to 8 CAT5e/6 outputs.
CSI-8H8CVTX
8 HDMI to CAT6 P. to P. HDBaseT Transmitter
The CSI-8H8CVTX is an 8 HDMI over CAT6 Point to Point Transmitter.
CSLUX-300I
Multi Format to VGA and HDMI Scaler
The CSLUX-300I Digital Video Scaler is one of the most advanced digital scalers on the market.
CWF-901SP
Wi-Fi / RJ45 to HDMI Smart player
CWF-901SP is a WI-FI Smart Player to TV can send video/audio signals from a smart phone, PC or Notebook through WI-FI to a TV and use it as the primary display.
DE02E-2
DVI-D CAT5E/6 High Performance Transceiver
The transceivers belonging to this family carry up to 100 m a digital DVI-D signal through a CAT5E or CAT6 cable.
GL001H
Video Ground Loop Isolator
GL001H Video Ground Loop Isolator is a passive device which reduce the ground loop interference in the connection of the video equipments.
HD01-2
HDMI to DVI-D Converter w/ digital and analog Audio out
HD01-2 is a device that provides an easy and instant approach for converting digital video HDMI to DVI-D signal providing both digital and analog de-embedded audio outputs as well.
HDC-VX
CV, Audio & IR Transceiver
CV, Audio and IR Signals Extension kit.
HE01SE-2
HDMI 1.3 CAT6 3.4 Gbps Transceiver
This pair belongs to the low cost family of the HDMI transceivers.
HE02-2
HDBaseT™ HDMI 1.4, RS232, IR, w/o ARC, CAT6 Transceiver
This product belongs to the high-end HDMI transceivers and is suitable to convey through 100 m. of CAT6 cable, one HDMI, one RS232 and two IR signals.
HE02E-2
HDBaseT™ HDMI 1.4, w/o ARC CAT6 Transceiver
This product belongs to the high-end HDMI transceivers and is suitable to convey through 100 m. of CAT6 cable one HDMI signal.
HE02EI-2
HDBaseT™ HDMI 1.4, w/o ARC CAT6 Transceiver
This product belongs to the high-end HDMI transceivers and is suitable to convey through 70 m. of CAT6 cable one HDMI signal.
HE03L-2
HDMI 1.3 CAT6 Long distance 3.4 Gbps Transceiver
This product belongs to the high-end HDMI transceivers and is suitable to convey through 100 m. of CAT6 cable one HDMI signal.
HE03LR-2
HDMI 1.3 CAT6 Receiver w/ N°1 HDMI and N°2 CAT6 out
This device is the receiver part of the kit HE03L that can be matched with the transmitter HE03LT-2 or with another receiver thanks to the built in 2 out RJ45 port chainable function.
HE03LT-2
HDMI 1.3 to one CAT6 Transmitter
This device is the transmitter part of the kit HE03L that must be sold at least with one HE03LR receiver.
HE04M-2
HDBaseT™ 4x4 HDMI Matrix w/CAT6+Local Outputs
HE04M-2 is a 4x4 matrix for HDMI signals that uses the HDBaseT™ technology.
IE01
IR CAT5 bidirectional Transceiver
This kit allows you to perform the IR remote control for up to four A/V devices over a single CAT5 cable. Devices can be controlled up to 1.000 m. away.
MIO-MVS-4HD
Quad HD/SD-SDI Multiviewer
MIO-MVS-4HD is a low cost miniature box multiviewer system.
RS002E
RS232 on CAT5 Transceiver
The RS002E is able to extend the short range of any RS232 compliant devices through one CAT5 cable up to 1000 m. at 115.2 kbaud.
SP006
Network Surge Protector
SP006 is designed to protect UTP twisted pair products or any computer equipment against surge high voltage attacks.
SP006P
Network and PoE Surge Protector
SP006P is designed to protect PoE (Power over Ethernet) data/communication line in local and wide area network up to 100 BaseT transmission speed, against high voltage surge attacks.
SP007
HD-SDI Surge Protector
SP007 is a protector suited for any digital video equipment connected by coax cable against high voltage EM attacks.
VKM03
VGA + 4 USB + Audio + RS232 + IR Transceiver
The VKM03 is able to transmit through a CAT5 cable a VGA with stereo audio, USB, RS232 and monodirectional IR up to 120 m. of distance. It offers a VGA local loop as well.
WP922
Patch Panel w/ Shuko, 2 LAN, HDD, 3.5 mm. Jack, button
WP92x Series belong to the flush mounting table Patch Panels with pneumatic opening and pressure closing.
WP923
Patch Panel w/ Shuko, LAN, USB, HDD, 3.5 mm. Jack, button
WP92x Series belong to the flush mounting table Patch Panels with pneumatic opening and pressure closing.
WP925
Patch Panel w/ Shuko, LAN, XLR, HDD, 3.5 mm. Jack, button
WP92x Series belong to the flush mounting table Patch Panels with pneumatic opening and pressure closing.
WP926
Patch Panel w/ Shuko, LAN, USB, CV, HDD, 3.5 mm. Jack
WP92x Series belong to the flush mounting table Patch Panels with pneumatic opening and pressure closing.
WP951
Patch Panel w/ Shuko, 2 LAN, HDMI, HDD, 3.5 mm. Jack, 3 RCA
WP95x Series belong to the flush mounting table Patch Panels with pneumatic opening and pressure closing.
WP953
Patch Panel w/ 2 Shuko, 2 HDD, 2 x 3.5 mm. Jack, 2 button
WP95x Series belong to the flush mounting table Patch Panels with pneumatic opening and pressure closing.
WP958
Patch Panel w/ 2 Shuko, LAN, HDMI, HDD, 3.5 mm. Jack
WP95x Series belong to the flush mounting table Patch Panels with pneumatic opening and pressure closing.
XIO-9030-HDDEM-2AES
HD/SD-SDI 2 ch. AES De-emb.
XIO9030-HDDEM-2AES is high-quality interface, based on brand-new XIO platform, which de-embeds up to 2 AES 24-bit 48 KHz digital audio signals from a serial digital HD/SD video signal. It can detect, pass, and insert EDH into HD/SD signals.
XIO-9030-HDDEM-2AES-FS
HD/SD-SDI 2 ch. AES De-emb. w/ F.S.
XIO9030-HDDEM-2AES-FS is high-quality interface, based on brand-new XIO platform, which de-embeds up to 2 AES 24-bit 48 KHz digital audio signals from a signal HD/SD serial digital video signal. It can detect, pass, and insert EDH into HD/SD signals.
XIO-9030-HDEMB-2AES
HD/SD-SDI 2 ch. AES Embedder
XIO9030-HDEM-2AES is high-quality interface, based on brand-new XIO platform, which embeds up to 2 AES 24-bit 48 KHz digital audio signals into a signal HD/SD serial digital video signal. It can detect, pass, and insert EDH into HD/SD signals.
XIO-9030-HDEMB-2AES-FS
HD/SD-SDI 2 ch. AES Embedder w /F.S.
XIO9030-HDEMB-2AES-FS is high-quality interface, based on brand-new XIO platform, which embeds up to 2 AES 24-bit 48KHz digital audio signals into a signal HD/SD serial digital video signal. It can detect, pass, and insert EDH into HD/SD signals.
XIO-9040-VSD-HD-DC
HD-SDI to SD-SDI Down Converter
XIO9040-VSD-HD-DC is a high-quality downconverter, based on brand-new XIO platform, which converts one HD-SDI signal to two identical SD-SDI signals with frame sync processing.
© 2008-2013 Elpro Video Labs. All rights reserved. Website & Database design by www.delpiano.com