The TPA110 series consists of two pairs, transmitter and receiver, designed for remote transmission, via CAT5 UTP cable, of a video signal and of a stereo audio signal. For simple monitoring applications, a distance of up to 900 meters can be covered using a UTP AWG22 cable.
The most complete pair, called TPA110 IRT / IRR, also permits passing of an IR signal. It also provides visual indication of the correct input video signal and, through contact in exchange of a relay, permits remote alarm or remote signaling.
 |
-
Video and audio stereo Transmitter / Receiver
-
Compensation adjustment
-
Video signal in arrival indication
-
Exchange contact for video present
-
Bi-directional IR transmission
-
Carrier frequency up to 1.2MHz
-
19″ compatible
|
TPA110T / TPA110 IRT |
Video input type |
BNC, AC coupled |
Input return loss |
35 dB at 5 MHz |
Audio input type |
RCA socket, AC coupled |
Input impedance |
20 kohm |
Input level |
+10 dBm max |
Line OUT |
8 Phoenix screwtype detachable (four pairs balanced) |
IR IN |
3 Phoenix screwtype detachable |
IR OUT |
jacks mono 3.5 mm |
IR Signal type |
Carrier frequency up to 1.2 MHz |
|
TPA110R / TPA110200 IRR |
Line IN |
8 Phoenix screwtype detachable (4 pairs balaced) |
Video OUT |
BNC, not clamped |
Equalization /
Frequency response |
±1,5 dB from 30 kHz to 5 MHz up to 375 mt CAT5 AWG26 cable ±1,5 dB from 30 kHz to 5 MHz up to 500 mt CAT5 AWG24 cable
±1,5 dB from 30 kHz to 5 MHz up to 600 mt CAT5 AWG22 cable
|
Delay |
2,0 µS at 375 mt |
Differential gain |
0,6 % worst case |
Differential phase |
1,2° worst case |
LF response |
1,2% on 50 Hz square wave |
Hum & noise |
-70 dBm unweighted with 375 mt CAT5 AWG26 cable |
AUX (video presence) |
3 Phoenix crewtype detachable
C, NO, NC, dry contact |
IR IN |
3 Phoenix crewtype detachable |
Audio Out |
RCA socket |
Output level |
Adjustable for up to 375 mt CAT5 AWG26 cable
|
Max. output level
|
+10dBm
|
Output impedance
|
150
Ω
|
Audio response
|
-0.5 dB from 10Hz to 20KHz; -3 dB at 95 KHz
|
Distortion
|
0.04% from 20Hz to 20KHz at +6dBm
|
Crosstalk L/R (Worst case)
|
55 dB at 16KHz worst case
|
Hum & Noise
|
:-64 dBm unweighted through 350mt CAT5 cable
|
Video/Audio crosstalk
|
68 dB worst case through 350mt CAT5 cable
|
Audio/Video crosstalk
|
80 dB at 16 KHz through 350mt CAT5 cable
|
IR OUT |
jacks mono 3.5 mm |
IR signal type |
Carrier frequency up to 1.2 MHz |
|
GENERAL |
Main input
(with AC adapter ADM 001) |
230 Vac 50 Hz |
Power consumption |
5 VA |
Size (WxDxH) |
200 x 100 x 44 mm |
Weight |
0.5 Kg / each unit |
Operating temperature range |
0 – 45 °C |
Safety |
according to EN60065 |
EMC |
according to EN55103-1 and EN55103-2 |
