The TPW 300 product is a dual transmitter and receiver for remote transmission via CAT5 UTP cable of a RGBHsVs graphic signal. Alternatively, three video signals or one video and one Y/C, or a Y, Cb, Cr component signal can be sent.
 |
- RGBHsVs Trasmitter/Receiver
- Parallel-settable receivers
- Jumper type cable loss compensation
- Suitable for high resolution signals
- 19″ compatible
|
| TPW300T |
| RGB Input type |
3 BNC, DC coupled, 75 ohm terminated
|
| H & V Input type |
2 BNC, TTL level |
| RGB Input return loss |
33 dB at 10 MHz |
| Line OUT |
8 Phoenix screwtype detachable (four pairs balanced) |
| Main Input (with AC adapter ADM001) |
230 Vac |
| Power consumption |
5 VA |
| Size (WxDxH) |
200x100x44 |
| Weight |
0.5 Kg |
|
| TPW300R |
| Line IN |
8 Phoenix screwtype detachable (four pairs balanced) |
| RGB Out |
3 BNC, black level zero Volt adjusted |
| H & V Out |
2 BNC, TTL level |
| RGB Output return loss |
30 dB at 5 MHz |
| Compensation |
7 steps, up to 680 m AWG22 CAT5 cable |
| Main Input |
230 Vac |
| Power consumption |
7 VA |
| Size (WxDxH) |
200x160x44 |
| Weight |
1.0 Kg |
|
| TPW300T + TPW300R |
| Max Resolution |
1600×1280 at 60 Hz with 100 m AWG22 CAT5 cable |
| RGB Crosstalk |
30 dB at 10 MHz |
| Delay |
2.0 uS through 375 m AWG26 CAT5 cable |
| Differential gain |
0.6% worst case |
| Differential phase |
1.2° worst case |
| Hum & noise |
-66 dBm unweighted through 375 m AWG26 CAT5 cable |
|
| GENERAL |
| Operating temper. range |
0 – 45 °C |
| Safety |
according to EN60065 |
| EMC |
according to EN55103-1 and EN55103-2 |
|
